M57 to Ford Transit MT82 2.2 Gearbox Adapter Kit
This kit allows you to bolt a BMW M57 306d1 engine to the Ford TDCI 2.2 MT82 gearbox.
Allows use of original Clutch release bearing/slave cylinder, original fitment BMW clutch cover and dual mass flywheel. A non self adjusting cover is recommended
Engine runs at correct angle with flat sump.
Kit includes:
Adapter plate and fasteners
Spigot Bearing
Clutch Plate (cover and DMF not included) To suit 184bhp. Should be upgraded as required.
Starter motor cover block (not pictured)
Release Bearing Shim (not pictured)
Recommended Clutch and Flywheel to use. Use these parts only.
Valeo Slave/Bearing: 810206
Sachs Clutch Cover: 883082001243
Sachs Flywheel: 2294001391
FITTING VIDEO:
https://youtu.be/zMZLCM8TReU
Bolt adapter to engine with fasteners supplied.
Fit new spigot Bearing flush with end of crank spigot
Replace standard BMW clutch plate with plate supplied in kit
Cut Bell housing to match adapter for starter motor clearance.
Fit bearing shim over end of release bearing.
Bolt Bell housing to adapter with start cover block.
Registered with the Intellectual Property Office
See below our ‘What’s In The Box’ video for this kit:
Brian wilton (verified owner) –
I’ve now use 2x of the an can confirm they fit great no clutch clearance issues or anything that dosent fit correct just incase it help any one I fitted the m57 184bhp engine fron a bmw e39 530d i also used the e39 flywheel an clutch pressure plate matted it to the original mk8 rwd 2.2 euro5 transit gearbox absolutely over the moon with the addapter plate an service I received. Will use again 100%