BMW M57 to 300tdi R380 Adaptor and Flywheel Kit

(12 customer reviews)

£850.00 Excl. VAT

Includes CNC machined aluminium billet adaptor and various caphead screws to bolt the adaptor to the block, A custom spigot bush. Solid mass flywheel. COLOUR SILVER

 

SKU: bmw57adaptor Categories: ,
Description

Syncro Gearboxes BMW M57 to 300tdi R380 Adapter and Flywheel Kit – **COLOUR SILVER**

The new Syncro Gearboxes BMW M57 to 300tdi R380 Adaptor Kit allows you to bolt a standard 300tdi R380 to a BMW M57 engine.

50mm thick, Solid Aluminium Billet. You won’t need to use a hybrid box made from rare parts that are hard to source. Any defender or discovery 300tdi R380 will bolt straight up. At 50mm thick its the thinnest adaptor we could achieve when using a standard 300tdi R380

Includes CNC machined aluminium billet adaptor and various caphead screws to bolt the adaptor to the block,, spigot bush, dowels etc.

You must use your bmw ring gear from a bmw flex plate or flywheel with a 270mm inside diameter. These can be found on manual flywheels and auto flexplates.

Flywheel to suit any tdi/tgv fitment clutch cover and plate. You must use this release bearing: https://www.onlinegearboxparts.com/product/clutch-release-bearing-defender-diesel-2-5-na-oem/ 

THIS KIT DOES NOT INCLUDE A CLUTCH. ANY STANDARD 200/300 TDI, TGV FITMENT CLUTCH MAY BE USED

Fitting Guidance
Designed to work with our Sold Mass Flywheel and the smaller X5 starter motor and will require minimal grinding of the bell housing near the new starter motor position as well as removal of 10mm of the end of the guide tube.

Assembling flywheel. – You will need a 270mm INTERNAL DIAMETER ring gear. Shrink the ring gear onto the flywheel but heating ring gear and then dropping it onto the flywheel. Allow to cool fully before fitting flywheel.

Start with the engine prepped and old flywheel, clutch and dust cover removed.
Ensure existing engine dowels are fitted, then place dust shield onto dowels against engine block.

Bolt adapter to engine block, sandwiching the dust shield.

Fit spigot bush in end of crank shaft.

Fit flywheel. Use supplied flywheel spacer between flywheel and crank.

Fit starter motor.

Fit clutch kit.

Bolt up gearbox. Ensure that dowels are fitted to the adapter and that the release bearing and clutch fork are fitted as normal.

Fit starter motor cover triangle. This may need grinding to suit your bell housing casting.

METRIC TORQUE SETTINGS

Fit M57306D1 Narrow block engines

Registered with the Intellectual Property Office

 

Additional information
Weight25.01 kg
Reviews (12)

12 reviews for BMW M57 to 300tdi R380 Adaptor and Flywheel Kit

  1. neilton b. (verified owner)

    Straight forward & simple to fit, would definitely recommend 100%

  2. Cesar C. (verified owner)

    Muy buena calidad. Y el envío a españa muy rápido

  3. Adrian Nap (verified owner)

    Very happy

  4. Cameron Merryfield (verified owner)

    Top quality part and amazing customer service!! Keep up the awesome work!

  5. Chris Soal (verified owner)

    Cracking bit of kit. Looks well! Yet to fit it but I don’t see there being any issues at all. Very well engineered

  6. Raffaele D’Angelo (verified owner)

    Ottimo prodotto!!!

  7. Anonymous (verified owner)

    Excellent kit!

  8. Francisco jesus P. (verified owner)

    Fantástico! No lo he montado aún! La entrega super rapida a españa! Cuando lo monte dejaré mi comentario, pero se ve que es de muy buena calidad el producto! Muchas

  9. Tony Vasquez

    Very good bit of kit work’s spot on with the R380 defender box

  10. Robert spray

    Cheers for this kit. works really well and fits nice on the r380 gear box would recommend this kit to any one

  11. dave (verified owner)

    Fitted this in my defender 90, sits really well in the engine bay no need to move gearbox mounts. i found there is minimum chatter. fitting plate was fairly simple any problems syncro were on hand to help.
    would of been nice too have some torque setting and some bolts for the bell housing but over all great product.

  12. Paul gates (verified owner)

    What a great kit all very well machined includes all the hardware down to the last nut and bolt looking forward to getting it fitted now

Add a review

Your email address will not be published. Required fields are marked *

Shipping & Delivery

🌏 Where do we deliver ?

We would hope to be able to satisfy our customers wherever they may be in the world*. We send shipments all around the world.

*Please note that unfortunately we are  unable to deliver to PO Boxes , APO or FPO addresses, so when ordering please supply a valid residential or commercial delivery address.

💷 How much is shipping? 

Please add the parts into your Cart, shipping charges are calculated at the checkout stage and based on final order weight and location. You will see your shipping charge before processing payment.  Please ensure you select the correct country for your delivery.  

For all deliveries, our website will automatically calculate the shipping charge based on your delivery country and total order weight.

VAT is calculated and charged at the checkout stage for UK based customers ONLY. 

For worldwide customers (outside of the UK) please note that any import duties/local taxes will be payable upon entrance to your country, this will be dependant upon your local laws and taxes applied to imported goods (this is not charged at checkout). Don't worry though, this process is easy as DHL will contact you to collect this on behalf of your government so your package can be delivered without delay.

📦 How do we deliver ?

  • All Domestic (UK) and International Deliveries (all weights) are sent with our partner courier DHL who offer a quick and fully trackable service straight to your door.

Once your order has been processed and booked for dispatch you will receive automatic notification from DHL with your tracking/waybill number and the link to monitor delivery progress, so please monitor your email inbox/junk folder.  Orders booked for dispatch will leave on our next available DHL collection.  Our DHL weekday pick up is usually between 11:30am -12:00pm.

For delivery to some countries (such as Brazil, Peru, India) we require your TAX ID or National ID number to include with the shipment booking.  If your TAX ID number is required we will contact you prior to dispatch, or to speed up this process please include this information in the order notes

For more information about our deliveries and stock please click 'Delivery' from the menu