THIS KIT WILL ALLOW YOU TO BOLT THE GEARBOX TO THE ENGINE, ALLOW THE CRANK, FLEX PLATE AND TORQUE CONVERTER TO BE ASSEMBLED AND JOINED. THE STANDARD STARTER MOTOR AND CRANK SENSOR WILL STILL FIT.
BMW N57 8hp to TD5 Auto adapter kit
Adapter Thickness – 78mm
COLOUR – ANODISED BLUE
Kit includes – Billet adapter plate, fasteners to bolt adapter to engine, box to adapter, flex plate to torque converter, inspection plate to adapter.
Needed outside of kit: Standard TD5 Auto Engine, flywheel, crank spigot boss, crank bolts, crank sensor and bolt, Td5 Starter Motor and bolts, TD5 Dust shield/shim. A BMW N57 8hp auto gearbox and torque converter.
Weight – Approx 20KG
Total Kit Price – £1000 plus VAT (where applicable) plus shipping.
Conversion Group: https://www.facebook.com/groups/800981597677376
- Using a Td5 auto, remove existing auto gearbox and flex plate.
- Fit new flex plate
- Fit Adapter plate
- Fit Gearbox and Torque Converter
- Bolt Flex plate to TC
- Fit inspection plate
- Fit crank Sensor
Remove existing auto gearbox and flex plate. Retain back plate, flywheel and crank boss + bolts.
Bolt on new flex plate
Bolt on adapter plate using bolts provided
Fit bolt in rear of back plate.
Fit Crank sensor
Fit Flex plate bolts provided. Note – We recommend cutting the bell housing and adapter as pictured to assist in fitting bolts though this is an optional decision. (OPTIONAL)
Fit inspection cover with bolts provided.
You can refit existing rubber bell housing grommet to cover the existing bell housing hole also.